![]() ![]() If you have a monitor that you suspect to be having dead pixels, you can have it along with you while going through the step-by-step method of detecting them. We shall share with you what it means for a monitor’s pixel to be dead, what causes this fault, and the most reliable step-by-step method that you can use to detect these dead pixels. 850€ is also relatively cheap compared to professional-grade monitors that cost thousands (and don't have gaming features).In this article, we shall discuss everything you need to know about dead pixels. And if you have a single defective pixel on an otherwise good panel, consider yourself lucky. Here's my opinion - consumer-grade displays are not going to be completely perfect, and if you think there's a high chance that you will get a worse one if you return it, then you shouldn't return it. The panel is otherwise excellent with almost no BLB and good uniformity (not perfect, but good enough that I only notice it on the desktop). It doesn't really bother me because I hardly ever notice it, it's about the size of a quarter of a pixel. My current one has a bright dot that looks like a stuck pixel but isn't - it's a bright green, almost white, dot that appears to be on top of an otherwise functioning pixel. After that I went through 2 XB270HUs, both of them had poor uniformity, a dust speck and the second one also had a dead green subpixel. Then I had two PG279Qs, both with a dust speck and very poor uniformity on top of atrocious BLB/glow, one of them also had a dead green subpixel. First one was an early XB270HU - huge dust speck in the central area, and poor uniformity. I went through 6 displays including my current one. If the dead subpixel is not in the central area I wouldn't bother, especially if yours is good BLB/uniformity wise. What do you guys think, should I return it? Or should I keep it? There's nothing wrong with it except the this one pixel. I want a pixel perfect PG279Q without any dust. I don't really care about BLB/Glow, so this is not an issue. But on the other side, I'm afraid of more defects/issues. The thing is, I want to return it and get a new PG279Q. So I was curious how likely it is, to get a PG279Q with dust and/or dead pixel/dead sub pixel. So what should I do now? After 6x XB270HU (and before that, 4x PG278Q), I'm tired of refunding/RMA this stuff. but you know, 849€ is not cheap and the dead pixel is not somewhere at the bezel. Its annoying me, I try to overlook it and I tell myself, that this monitor is great except this one pixel etc. No dust, okay color uniformity (better than all of my XB270HU's), BLB/Glow is also not extreme. I couldn't go back to 1080p 144Hz No Sync, I need 1440p 144Hz IPS. After I tried the 6th, I didn't want this monitor anymore and I refunded it (like 2 months ago). Seriously, I had 6x XB270HU and all of them had at least 2 dust specks, sometimes combined with dead pixels/dead sub pixels. But there was one huge problem with the XB270HU - the god damn quality control. The colors were great, 144Hz was super smooth, 1440p eliminated a lot of aliasing and it looked much sharper. In may 2015, I bought the XB270HU and it was such a great monitor. I jumped on the IPS 144Hz 1440p G-Sync train and I can't go back now.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |